World's Leading Assignment Library

Question Preview

Topic: Emerging Trends in Information SystemsAssignment Topic:Based on the last digit of the student ID, the following table shows the topic that students need to work on for their assignment :Student ID ending withTopic0 or 5Wearable Technologies1 or 6Internet of Things (IoT)2 or 7Driverless cars3 or 83D Printing4 or 9Augmented RealityTable 1: Topic AllocationAssignment Details:Students must write 1500 words report and give a presentation on the topic allocated to them according to Table 1. Students need to do research on the given topic by reading recent (2015 onwards) research titles (journal articles, conference papers and books). It is very important to note that research is a key criterion that will influence the mark you earn. Research is considered appropriate when students make th

Answer Preview

Introduction:

The day-to-day innovation of science and technology used to turn inconceivable futuristic into reality that makes human life more attractive as well as easier. The 3D printing technology is one of the innovations and it is much more intricate applications in science and technology. With the help of 3D printing technology; 3D solid objects of any geometrical shape can be made from a digital file.  By laying down consecutive layers of a particular material the whole object is made. Each layer represents a lightly sliced flat cross-section that resembles with the output of a normal printer of the ultimate object (K. France, 2014).

 Chuck Hall discovered stereolithography process where various layers are summed by curing photopolymers with UV lasers in 1984 that is the starting of 3D printing. (Mananes R., et.al., 2016).  In 1990, the technology is improved as layer by layer where the depth of each layer is 0.1mm. This technology was used in medicine in 1999.  The human body parts like ears and fingers were used this technology in 2000.  3D printing technology was familiar as open source from 2005. Using this technology, selective laser sintering (SLS) were variable from 2006. In 2008, first self-replication printer made where most of the components of this printer were able to print.  In this period, 3D technology was capable to perform a very hard shapes as well as artists for designers. The Bio3D p

Get solution